Lona Indoor con Elastico 8x50mt Lona Indoor para Barcos MT.8X50 Its uniqueness is the two elastic applied laterally along the entire length, to facilitate
and reduce time of installation.
1 - Roll out the cloth from bow to stern keeping the boat leaving a power surplus of
about 50 cm on each side.
2 - Apply two clamps spaced about 30 cm and cut the cloth.
3 - Remove the rubber bands and knot.
4 - Open the canvas on the boat.
5 - Pull the rubber band from one end and knot to hold it in traction.
6 - Use the appropriate pre cuts if needed reinforcements to connect across the
perimeter. Tickness mm. 0.02
tienda nautica en barcelona nauticpassio.com